Additional Features:
Made of Steel
For use with cast iron bushed bore pulley
This U1 Bushing with 5-1/2″ bore is a high-quality precision product that’s built for toughness and strength. U1 bushings are used in an extensively wide selection of applications, which include; sprockets, shaves, pulleys, gears, and much more, we as well offer most of these items. What pieces this bushing apart is the high-quality steel construction along with precise manufacturing and high quality control; this means that you always get yourself a premium quality regular product. What really models us in addition to the other folks is our highly trained expert staff members and our company-wide goal of customer satisfaction.
1. Be sure the tapered cone areas of the bushing and the within of the driven merchandise will be clean and free of anti-seize lubricants.
2. Place the bushing in sprocket or other component type that accepts the bushing.
3. Place cap screws loosely in pull-up holes. The bushing remains loose to assure sliding match on shaft.
4. With crucial on shaft, slide the sprocket or other portion type to the desired job on the shaft. Make sure you leave the heads of the cap screws attainable.
5. Align the sprocket or component type, tighten the screws alternatively and progressively until they happen to be pulled up tight. Do not apply extensions on the wrench handles , 
nor allow the sprocket or portion to be drawn i contact with flange of bushing. At this time there should be a gap between your bushing flange and sprocket, make sure this gap will not close.
Dual split barrel ensures concentricity
Grips the shaft with great clamp fit
High torque carrying capacity
Permits blind assembly
Load not carried or tied to mounting screws
External key on most sizes for positive drive and better torque carrying capabilities
Double-split barrel for great clamping
Solid flange to keep up concentric bores
Available in inch, metric, and spline bores. Bore range from 3/8″ to 10″
Solid Flange & Dual Split Barrel – Assures better concentricity to the shaft.
Key to Key Travel – With keys on both shaft and merchandise to supply the strongest possible travel.
3/4″ per Foot Taper on Barrel – Self locking taper provides the highest degree of mechanical locking item to product.
Taper bushing are trusted as well as sprockets, v-belt pulleys, timing pulleys, coupling and other mechanical parts with taper bore connections.
Taper bushing series are created from high quality engineered components with wonderful tolerance. The characteristic is easy to make use of and needs no further alteration. These bushings can fit almost a myriad of assemblies and sizes. They will be the best choice in design for mechanical connections.
To complete designations add bore size. For example: PD1215X16MM designates a 1215 taper bushing with a 16mm bore.
No costly re-boring: full selection of both metric and imperial readily available.
Standard range meets up to 125mm/5″ shafts & Hub diameter required will depend on the application.
Complete brief reach range readily available, for compact lightweight assemblies & Clean, Compact Design.
Ease of installation and removal.
This Split Taper Bushing is designed exclusively for use with cast iron bushed bore pulleys and may be purchased on a single page as the pulley you will need.
For use with 1 3/16” shaft sizes.
Comes with 2 set screws.