This standard range of Servo-Worm Reducers are ideal for use in applications that demand high performance, precise positioning and repeatability. These were specifically developed for use with state-of-the-art servo engine technology, providing tight integration of the electric motor to the unit. Angular backlash of less than 1 arc-a few minutes is provided standard.

They can be purchased in four sizes (50 mm to 100 mm center range) with input boosts to 5,000 rpm, reduction ratios from 4.75 to 52:1 and output torque capacities up to 885 lb.ft. A wide range of motor couplings and mounting flanges are for sale to assembly to practically all servo motors, and the hollow bore output can be used to mount output shafts, pinion shafts, or other drive elements.

Standard applications for these reducers include precision rotary axis drives, traveling gantries & columns, materials handling axis drives, zero-backlash axis drives and digital line shafting. Industries served include Material Managing, Automation, Aerospace, Machine Tool and Robotics.
low backlash worm drive helical-worm servo gearmotors possess a torque range of 92 Nm to 520 Nm. As angular drives they are specially space-saving and decrease the expenditure for valuable installation space.

The helical-worm servo gearmotors were created so that they guarantee you a low-noise system environment. Moreover, these gearmotors provide you excellent attenuation properties for the operation of your systems with low degrees of vibration. This can be due to the longitudinal software of drive on the insight shaft. This enables torque impulses to become prevented efficiently and for maximum results in terms of running smoothness and sound reduction to be achieved.

Both the equipment unit, and the synchronous servomotor derive from our modular system. This allows you to have completely individual configuration options for each application. One issue is certain – Our servo gearmotors are real specialists for very particular requirements.
Wormwheel gearboxes go by several names, including 90-degree gearboxes, right position gearboxes, rate reducers, worm equipment reducers and worm drive gearboxes. Gear reduction boxes include a gear arrangement when a equipment in the kind of a screw, also referred to as a worm, meshes with a worm gear. These gears are usually made from bronze and the worms are steel or stainless steel.

While worm gears are similar to a spur gear, the worm gearboxes are considerably smaller than other equipment reduction boxes. A main benefit of worm gear reducers is usually that they generate an output that’s 90° from the input and can be used to transmit higher torque or decrease rotational speed. Most often, a worm gearbox has right hand threads; to change the direction of the result, a left-hand thread worm gearbox is required.
At times a motor’s capability may be limited to the stage where it needs gearing. As servo producers develop more powerful motors that can muscle tissue applications through more difficult moves and generate higher torques and speeds, these motors require gearheads equal to the task.