Fan Motor, 1/8 hp 120V 2.2 Amp 3-Speed
General Explanation: New fan motor, taken off unused 18” or 24” China Air flow Compressor diameter TPI fans. Made to run an 18” or 24” enthusiast blade (blade NOT included).
This motor includes a (detached) cord with grounded plug, motor capacitor and a 3-speed control switch. All the wiring between your electric engine, capacitor and quickness control switch is still hooked up nevertheless the cord itself is normally detached as seen in the photos. (Find “Control Notice” below for alter type.)
T (See “Application Notice” below for make use of in various other applications.)
Sizes: The engine body is 5” diameter and 3 ½” long (excluding the shaft). The engine shaft is usually½” (0.500″) diameter x 2 ½” lengthy with a collection screw smooth. There are (4) threaded mounting lugs on leading of the motor, ½” lengthy x .16 dia. with washers and nuts. The studs appear to have got 4mm threads and also to be on a 117mm (4.6”)diameter circle (3 ¼” measured from one stud to another).
Rate: The approximate electric motor speeds (with a enthusiast blade attached):1660, 1550 and 1370 RPM. Direction of rotation (electric fan motor china facing the shaft end of the electrical motor) is Clockwise.
Control Take note: Motors may come with The 3-swiftness rotating control KNOB OR a 3-speed PULL-CHAIN SWITCH (we’ve demonstrated BOTH variations in the images). Both of these types of switches both control the engine in the same way (but you have a rotating knob and you have a pull-chain). If you order several electric motor at a time, we can do our best to supply your purchase with each one sort of control or the additional.
Application Note: USUALLY DO NOT use this electric motor in a nonfan app. This is a completely enclosed fan electric motor and made to have continuous ventilation over the motor casing for cooling. The casing isn’t vented and the electric powered engine will overheat and get into automated thermal overload if operate in a nonfan system where there isn’t solid ventilation past the motor. (Caution Note: the electric motor will restart instantly when it cools cool off.) Using this electrical motor for applications aside from 18 & 24″ TPI fans may possibly also overload the electric motor and cause it to proceed into automatic thermal overload. (Your companion blade from another manufacturer may possess a steeper blade 
angle.)
Origin: This electric electric motor is produced in China.