Product Description
Model:XHW20LPG2 worm gearbox for valve
Double stage, horizontal
Application
XHW part turn worm gearboxes are applied to dampers, ball valves, butterfly valves and also other 90° quarter turn valves. XHW part turn worm gear operator has variety models of hand wheel for optional.
Operating Environment
XHW part turn worm gearboxes are with good mechanical quality and steady operating performance which apply to deal with variety climate and temperature. We strive to develop RHW part turn worm gear operators to meet higher demands.
Enclosure: IP67
Working Temperature: From -20ºC to 120ºC( -4ºF to 248ºF)
Painting: Silver grey (Customization)
Introduction
XHW series Part-turn Gearboxes use worm and worm wheel revolute pairs, with high performance needle roller bearing assembled on both ends of the worm shaft. It ensures the thrust requirement during rotation. It’s in high mechanical efficiency withstands big torque, small size with compact design, and it’s also easy to operate and has reliable self-locking function.
Characters
1.Precision casting ductile iron housing
2.Optional output torque, range up to 32000Nm
3.High efficient needle roller bearing
4.High strength steel input shaft
5.Stroke 0°- 90°( ±5°)
6.Compact structure
7.Grease filled for longer life
8.Adjustable stopper (±5°)
9.Good seal
Connect with valve
The flange connecting to valve is according to ENISO5210 or DIN3210(Customization)
Main Products
Worm gearbox, bevel gearbox, valve gear box, worm gear operator, worm gear actuator, valve worm gear, valve gear operator, valve gear actuator, valve actuator
Gear Operator, Valve Gearbox, Worm Gearbox, Gearbox, Speed Reducer, Part-turn Worm Gearbox, Worm Gearbox Supplier, High Quality Worm Gearbox, Gearbox manufacturer
(XHW20-PG2)
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Application: | Industry |
|---|---|
| Type: | Worm and Wormwheel |
| Protection Level: | IP67 |
| Working Temperature: | -20 to 120 Degrees Celsius |
| Applications: | Ball Valves, Butterfly Valves, Dampers and etc. |
| Painting: | Silver Grey or Customization |
| Customization: |
Available
| Customized Request |
|---|
Common Problems with Gearboxes and How to Troubleshoot Them
Gearboxes can encounter various issues over time. Here are some common problems and troubleshooting steps:
- Noise and Vibration: Excessive noise or vibration may indicate misalignment, worn gears, or insufficient lubrication. Check alignment, inspect gears for wear, and ensure proper lubrication.
- Overheating: Overheating can be caused by high friction, inadequate lubrication, or overloading. Verify lubrication levels, reduce loads, and ensure proper ventilation.
- Leakage: Oil leaks may result from worn seals or gaskets. Inspect and replace damaged seals, and ensure proper sealing.
- Reduced Performance: Decreased performance could be due to worn gears, damaged bearings, or misalignment. Inspect components, replace damaged parts, and realign as needed.
- Gear Wear and Tooth Damage: Wear on gear teeth can result from excessive loads or poor lubrication. Replace worn gears and ensure proper lubrication.
- Shaft Misalignment: Shaft misalignment can lead to increased wear and noise. Realign shafts using precision measurement tools.
- Lubrication Issues: Inadequate or contaminated lubrication can cause premature wear. Regularly check and replace lubricant, and use the correct type for your gearbox.
- Bearing Failure: Bearing failure may result from overload, misalignment, or inadequate lubrication. Replace worn bearings and address underlying issues.
- Seal Damage: Damaged seals can lead to leaks and contamination. Replace seals and ensure proper installation.
- Gearbox Lockup: Gearbox lockup may occur due to foreign objects or damaged components. Disassemble and inspect the gearbox, removing any obstructions and replacing damaged parts.
Regular maintenance, proper lubrication, and timely troubleshooting are key to addressing gearbox problems and ensuring smooth operation.
editor by CX 2024-04-03