Aluminum-Bronze Screw Gears


Precision grade JIS grade N9 (JIS B1702-1: 1998) JIS grade 5 (JIS B1702: 1976)


portion of gear Normal plane

Gear teeth Standard complete depth


pressure angle 20°

Helix angle 45°

Material CAC702
① When mating screw gears made of the same materials they may trigger abrasion and scoring. It is recommended to mate Screw Gears composed of different materials.

② The allowable torques proven in the table will be the calculated values based on the assumed usage conditions.

③ The Aluminum-Bronze Screw Gears backlash values proven in the table are the theoretical values for the backlash in the standard direction of a pair ofidentical gears in mesh.

④ For offset shaft applications, match a RH with a RH, or LH with a LH, to create a set of screw gears. For parallel shaft applications,

mesh reverse hands (RH and LH) of helical equipment sets.

⑤ If the bore diameter is significantly less than φ 4, then your bore tolerance class can be H8. If the bore diameter is φ 5 or φ 6, and the hole length (total length) exceeds three times the diameter, then the class is also H8.