DA/AC Fan motor

bar1.png

DA/AC Fan motor

 

Fan Motor, 1/8 hp 120V 2.2 Amp 3-Speed
General Description: New fan motor, removed from unused 18” or 24” China Air Compressor diameter TPI fans. Designed to run an 18” or 24” enthusiast blade (blade NOT included).
This motor comes with a (detached) cord with grounded plug, motor capacitor and a 3-speed control switch. All of the wiring between your electric motor, capacitor and quickness control switch is still hooked up however the cord itself is normally detached as seen in the photos. (Find “Control Notice” below for change type.)
T (See “Application Notice” below for make use of in various other applications.)
Dimensions: The engine body is 5” diameter and 3 ½” long (not including the shaft). The engine shaft is½” (0.500″) diameter x 2 ½” long with a collection screw smooth. There are (4) threaded mounting lugs  Fan motoron the front of the motor, ½” long x .16 dia. with washers and nuts. The studs appear to have got 4mm threads and to be on a 117mm (4.6”)diameter circle (3 ¼” measured from one stud to the next).
Rate: The approximate motor speeds (with a enthusiast blade attached):1660, 1550 and 1370 RPM. Direction of rotation (facing the shaft end of the electric motor) is Clockwise.

Control Take note: Motors may come with EITHER a 3-swiftness rotating control KNOB OR a 3-speed PULL-CHAIN SWITCH (we have demonstrated BOTH versions in the images). These two types of switches both control the engine in the same way (but you have a rotating knob and you have a pull-chain). If you order several motor at a time, we will do our best to supply your order with each one kind of control or the additional.
Application Note: Do NOT use this electric motor in a nonfan application. This is a totally enclosed fan electric motor and made to have constant ventilation over the motor casing for cooling. The housing isn’t vented and the electric motor will overheat and get into automatic thermal overload if run in a nonfan program where there isn’t strong ventilation past the motor. (Caution Note: the electric motor will restart instantly when it cools back off.) Using this electric motor for applications apart from 18 & 24″ TPI fans could also overload the motor and cause it to proceed into automatic thermal overload. (Your lover blade from another manufacturer may possess a steeper blade angle.)
Origin: This electric motor is manufactured in China.

 

Features available
Our OEM/ODM firm provides you what best fits your needs
Our product can be adapted: start to see the diagram and the chart below. Please give us the mandatory model name therefore we can provide you the most accurate quotation.
This chart if for reference, if you want cool features, provideus all relevant details for your project and we’ll be glad to assist you finding the product coordinating your need at the very best quality with the lowest price.
Please notice the purchase price and the MOQ may vary regarding the item you chose: do not hesitate to get hold of us to know more!

 

Packaging Details
10 feet or 3.05 meters each strand, loaded in plywooden case or pallet,We may also pack the chain according to request.
Delivery Time:45 days after received payment
Interface:Shanghai/Ningbo port
Lead Time :45 days after received payment

 

Our service
WE ARE ABLE TO Provide You:
◆ On-time Delivery of a wide variety of products
◆ Exceptional product solutions and service
◆ Quality guarantee
◆ Local technical support
◆ Fast response to clients: Feedbacks in 24 hours
“Quality is usually priority” EVER-POWER people usually attach great importance to quality controlling from the very starting to the finish. Our factory offers gained CE, VB, SGS & ISO certificates.
Ever-Power Transmission Group is a group corporation manufacturering all kinds of transmission components. We’ve 3 factories and 2 abroad sales corporations.

 

About us
Our company manufactures advanced boring and milling power mind, numerical control (hard rail and cable rail) sliding table and numerical control machine. We offer modular combination style and manufacturing scheme to efficiently improve production capability relative to product characteristics required for any industry.
The merchandise provided by Jingyao Numerical Control Company are produced at the vertical and horizontal machining center and so are scanned using three-dimensional detectors. The hardness text shall be made for main parts after thermal treatment. The products have high machining precision, easy transmission, specious surface area and reasonable design. The manufactured product is widely used in the auto parts, engine parts, agricultural machinery, engineering machinery, textile machinery, drinking water heating system fittings, pipe fittings, chemical gear parts, military project and mould making industry.
Since products are available on the market, they have been strongly suggested by both domestic and foreign customers.
The company mainly sells control parts, generating parts, cutting tools (measuring implement) and various other precision parts of domestic and overseas brands. Based on the source superiority of taking full benefit of the “Chinese slicing Device and Measuring put into action Market ” “Chinese Mechanical and Electrical Hardware town”, “Taizhou Automation Tools Marketplace”, and by combination with the inner technology encounter, the company provides on-collection and off-collection (O2O) one-stop purchasing system and create distribution departments in main cities.
Organization tenet: creation of value for Description and characteristics of air compressor customer, creation of opportunities for employees, and creation of benefits for the enterprise. We firmly think that we are able to open up up a new circumstance where we can get win-win results and mutual benefits with new and old customers through unremitting attempts.

 

FAQ
Q: Are you trading company or manufacturer ?
A: Our group consists in 3 factories and 2 abroad sales companies.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we’re able to offer the sample for free charge but do not pay out the price of freight.
Q: How long is your delivery time ? What is your conditions of payment ?
A: Generally it is 40-45 days. Enough time may vary depending on the product and the amount of customization. For standard products, the payment is: 30% T/T beforehand ,balance before shippment.
Q: What is the exact MOQ or cost for your product ?
A: Seeing that an OEM organization, we can offer and adapt our items to an array of needs.Thus, MOQ and price may greatly vary with size, material and additional specifications; For example, costly products or standard products will usually have a lesser MOQ. Please contact us with all relevant details to have the most accurate quotation.

If you have another question, please feel absolve to contact us