admin

March 24, 2020

Rugged compression-molded glass-fill up polyester housing
Light weight and compact
Non corrosive
Non metallic
Range of ratios
SW-1, 3.5:1 to 60:1
SW-5, 5:1 to 100:1
Grease Lubrication
Solid or Hollow output shaft
Adjustable mounting position
Worm Equipment Reducers also known as worm gearbox or worm speed reducers. Worm gear reducers are used for speed decrease and increasing the torque for electrical engine drives. You can choose to mount your NEMA engine to the reducer by using the NEMA C face flange or use a coupling. If you want a coupling for the output or input shaft see our coupling section for choosing the coupling. You can expect four assemblies left hand and right hands and double result shaft and shaft input and shaft result. Interchangeable with most worm gear manufactures. Find data sheet in item overview for diamensions. If you don’t see your type, please Contact Us.
8 Ratios Available from 5:1 to 60:1
7 Gear Box Sizes from 1.33 to 3.25″
Universally Interchangeable Design for OEM Replacement
Double Bearings Used on Both Shaft Ends
Anti-Rust Primer Applied Inside and Outside Gearbox
Shaft Sleeve Protects All Shafts
S45C Carbon Steel Shafts
Flange Mount Versions for 56C and 145TC Motors

Our worm gear reducers offer an option of a good or hollow result shaft and show an adjustable mounting position. Both the SW-1 and the SW-5, nevertheless, can withstand shock loading much better than other reduction gearbox styles, making them ideal for demanding applications.

Features

If you appreciated this article concerning worm gear reduer, click the web link listed below to access out site.