admin

March 19, 2020

helical worm gear motor
Helical-worm gearmotors
Due to their design and from being combined with a helical equipment stage, the helical-worm gearmotors S..DR.. have especially high efficiency. They are also extremely low-noise and thus avoid high noise emission levels.
Low-noise continuous operation: gear unit combination optimized regarding efficiency
Do you expect a drive remedy to impress you with its high level of overall performance and efficiency? If so, we’d recommend our high-quality helical-worm gearmotors EP to you. These can be implemented individually in the modular system. In this manner, they offer you a massive range of sizes, gear ratios and motor sizes.
However, their greatest strength is usually their running smoothness and their extremely low noise development. One thing is for certain – With the helical-worm gearmotors EP you opting for a powerful drive solution that you will hardly also hear.
The overall concept offers you many more practical product characteristics and benefits. These include the significantly higher efficiency of the helical-worm combinations as opposed to single helical-worm gear devices. This is one way you save extra energy in the operation of your systems and are able to noticeably reduce ongoing operating costs.
You will have the low-noise helical-worm gearmotors EP. – to suit your individual requirements – with a wide variety of AC motors. In addition, you can freely configure all of the relevant properties. In this way, you can effectively utilize all the benefits provided by this combination of low-noise helical-worm gear unit and performance-optimized electric motor. Even greater variance can be achieved because of the optional flange or foot-mounted design and by selecting between solid and hollow shaft.
Save time and money
By opting for among our gearmotors, you are already saving time and money with this selection and project planning. It is because our modular system enables a multitude of mixture options for gear models and motors. You can as a result reduce operating costs, depend on an extended service life and reap the benefits of simplified maintenance that is characteristic of our brand.
Helical-worm gear units
Helical-worm combinations with considerably better efficiency than solitary helical-worm gear units
Very low-noise operation
Available variants:
Foot- or flange-mounted
B5 or B14 flange-mounted
Solid or hollow shaft
Hollow shaft with keyed connection, shrink disk, splined hollow shaft, or Ever-Power
More on helical-worm equipment units of series EP
AC motors
Combine the helical-worm gear unit with our AC motors:
Characteristics
Quiet and dependable transmission of torque
High overload capacity
Hardened steel worm equipment and bronze alloy worm wheel provide exceptional sturdiness and lengthy service life.
Optional durable bearings deliver high radial and axial load capacity
High strength cast iron casing (SK02050 – SK43125)
Lightweight, corrosion-resistant aluminium alloy housing (SK02040.1)
Application Specific Solutions
Fields of use
Intralogistics
Material handling
Presses
Version
Solid and Hollow shaft (keyed, shrink disc ) Designs
Available in footed, shaft mount or flange mounted configurations
Right Angled gear units
Your advantages
Economical operation
Low noise
High permitted overhung loads
Helical-worm Gearmotor S Series
S series
Ever-Power helical-worm gear models are helical/helical-worm combinations, so they are more efficient than normal helical-worm gear units. Due to their outstanding effectiveness, these drives can be utilized in every industrial sector and tailored to individual torque and velocity requirements. The reduction ratios afforded by the helical-worm gear stage and the reduced noise levels during operation make these gearmotors ideal low-cost solutions for basic applications.
Available versions:
Foot-mounted or flange-mounted
B5 or B14 Flange-mounted
Solid or hollow shaft
Hollow shaft with keyed connection, shrink disc, splined hollow shaft
Helical worm geared motors
Tough, compact, eye-catching!
Because of the unique combination of optimized worm wheel material with unique lubricants, optimized shape, this powerful motor achieves high levels of performance and torque. The housing machined on all sides enables diverse mounting options. Double chamber shaft seals are used as standard.
The reduced contour design helps it be suitable for implementing applications e.g. in the meals industry. The housing does not have any recesses, which simplifies cleaning – an especially essential feature for areas with stringent hygiene requirements.
Technical Data
Number of sizes:6
Power Range:0.12 – 7.5kW
Output torque range:50 – 1,300Nm
Ratio:3 – 3,400
Output option:output shaft, result shaft on both sides, hollow shaft, hollow shaft with shrink disc
Assembly/mounting:uniblock, flange, torque arm, foot
Class 12 Helical and hardened and ground worm gears: Provides higher efficiencies and higher torque capacity in smaller sizes.
Multiple Input Options: Essential gear motors, in . or metric shafts, NEMA, IEC, and servo adapters provide unmatched drive versatility.
Multiple Output Choices: Hollow bores and shrink disks for shaft installation, inch and metric result shafts, mounting pilots and flanges offer a wide variety of design solutions.
UNIBLOCK Housing: For optimum rigidity universal installation on five sides or via a torque arm.
Sealed for Washdown: Will keep contaminants and water out.
Worldwide Electric motor: Multiple leads and windings for worldwide multi volt/Hz requirements in addition modular design to simply accept brakes, encoders or forced cooling.
EP gear motors are economical, right-angle, worm-geared motors that install easily in the tightest applications. Economical right position worm geared motors arranged new specifications for reliability, effectiveness and economic climate with unparalleled features including hollow shafts in the smallest sizes. An inverter friendly design offers easy integration right now and a truly future proof remedy. The EP gear engine offers total versatility in mounting options includes shaft, base, encounter, and flange solutions. The engine terminal box can be mounted in choice positions rotated in 90º steps around the electric motor frame offering for unparalleled integration opportunities.
EP gear motors adhere to UNITED STATES and International criteria, including NEMA, IEC, CSA, and CE, the EP series allows for worldwide acceptance, a genuine total option for our global customers.
Superior protection of IP65 acc. to IEC 529 assures you that the EP series can be dust tight and hose proof,and can be utilized outdoors or in wet and dusty conditions without the utilization of additional enclosures. Full rated output is offered by the result shaft of the machine.
Product Features
Power ranking up to 5,5 kW.
Torque 25 … 1.000 Nm
Output Speeds 0,2 … 300 min-1
versatile installation possibilities
Totally enclosed, sealed against dust and water spray
Lubrication change initial after 15000 hrs
Low noise gearing
Mains connection 110 … 690V, 50/60Hz
Enclosure IP65 (Standard), IP66 (Optional)
Connection Regular with CAGE CLAMP®
Additional features:
Connecting with Plug connectors.
With integrated inverter up to 7,5kW.
EP-Mark
CSA, UL, ATEX, GOST, CCC, ISO9001, ISO14001, OHSAS18001
Motors according to EN 60034
Corrosion category based on DIN ISO 12944-5
C1, C2, C3, C4, C5-I, C5-M
Because of the unique combination of optimized worm wheel material with unique lubricants and optimized form, this powerful geared engine achieves high levels of efficiency and torque. The reduced contour design makes it suitable for implementing applications e.g. in the food industry. The housing does not have any recesses, which simplifies cleaning – an especially important feature for areas with stringent hygiene requirements.
Nominal torque: 50 – 1300 Nm
Rated power: 0.12 – 7.5 kW
Ratio: 3 – 3400
The 800BR contains a wide selection of compact, durable helical gear drives with extended life performance features and simplified maintenance. The utilization of condition of the art helical and worm equipment combinations affords optimum efficiency fulfilling a multitude of ratio requirements. The 800 BR is certainly functionally interchangeable with many major manufacturer’s drives.
SPECIFICATIONS
Dual and triple reduction ratios from 8:1 to 900:1,
4 case sizes – 830, 840, 850, 860
All models shipped pre-lubed for your unique mounting position with KluberSYNTH UH1 6-460
Available in NEMA C-face flanged and immediate input
Projecting and hollow result shafts
Available accessories
Output flange kits
Torque arm kits
Base kits
Output shaft kits
Product Features
Available in nontoxic white (BK) and stainless epoxy finish (SBK)
Obtainable in hollow or projecting result shafts
Double and triple reduction ratios
Flanged or foot mounted
All models adaptable to flooring, sidewall or ceiling mounting
Helical worm geared motor
0,12 – 5,5 kW
4 – 996 Nm / 6 – 316 rpm
Stober MGS S helical worm geared motor
Efficient small right-angle geared electric motor. A favorably priced alternate for the standard duties expected of a right-angle drive.
5 equipment sizes (S0 to S4).
Engine power 0.12 to 5.5 kW.
Rated torque of 23 to 800 Nm.
Gear ratios from we = 6 to 680.
Backlash smaller than 20 arcmin.
Modular, torsionally stiff , leak-proof design.
Helical worm geared motors obtainable with:
Solid shaft with keyway.
Hollow shaft with keyway, optional with cover.
Hollow shaft with shrink disk, optional with cover.
Gear device and AC motor are directly flange mounted, the pinion is upon the electric motor shaft. This integrated small design is an essential factor for the high precision and the incredible stiffness of EP geared motors.
For vector-controlled inverter operation use of an incremental encoder is provided for as standard.
Worm gearboxes and helical worm gearboxes / geared motors (S and SS)
The degree of efficiency in Ever-Power powerful worm gearboxes and helical worm gearboxes is more than 90%. All worm shafts are made from case hardened alloy steel and the flanks are precision floor. The worm tires are made from particular wear-resistant bronze. Helical worm gears are equipped with a helical gear. Worm gears with shrink disc, torque limiter, as well as adjustable backlash designs are also component of our standard item range.
Worm gearboxes and helical worm gearboxes type S and SS are high-Performance gearboxes in universal design. The housings are manufactured from high quality cast iron. The rugget walls and inner ribbing ensure incredibly torsional stiff and sound dampening housings. The external ripping offers a rapid heat conducting.
Type S und SS
Technical characteristics:
Optimised size/performance ratio
Designed for permanent procedure under rough circumstances
Above average lifespan
Housing produced from top quality grey cast iron with rugged walls and internal ribbing
Extreme torsional resistance and low noise
Case hardened worm shafts and worms with precision ground flanks
Worm wheels produced from unique bronze
Superior smooth operation
Space saving angular drive
Helical worm gearboxes built with helical gear wheel
Low engine speeds
Options:
Basic mounting, flange installation or universal design
Output shaft available since solid shaft or hollow shaft
Shrink disc, torque limiter,and also adjustable backlash
Second shaft end for fitting encoders or brakes
Torque arm
IEC-adaptor
NEMA version
Free input shaft
ATEX specification according to directive 94/9/EG

To view comparable helical worm gear motor products we provide click.