admin

February 17, 2020

The particularly sturdy sizes K..39 and K..49 complete our range of two-stage helical-bevel gear units. They set the standards as well as sizes K..19 and K..29: four sizes allow for torques from 80 Nm to 500 Nm.

With their high efficiency in both directions of rotation and at any input speed, these right-angle gear units are very energy-efficient. Their high-endurance gearing is wear-free and lasts a gear unit’s lifetime. For exact positioning tasks, you can use the K series gear units with minimal backlash.

Nominal torque: 53 – 20000 Nm
Rated power: 0.12 – 90 kW
Ratio: 5.5 – 8900
K series helical-bevel equipment units: high amount of efficiency and gearing with high exhaustion strength
K series helical-bevel equipment units
The figure shows a gearmotor with a helical-bevel gear unit
The compact design of all our gear units is most apparent inside our helical-bevel gear units. This real estate is particularly interesting, for example, for machine applications with limited space available. Here, you need effective drive technology with a concise design. This is just the right environment for our helical-bevel gear models with a torque range from 80 to 50,000 Nm.

In combination with an IE4 synchronous electric motor, our two-stage bevel equipment units become the energy conserving LogiDrive program for intralogistics. LogiDrive drive models have a large overload capacity and help reduce operating costs thanks to their high efficiency. Due to their modular framework, users also achieve considerable cost savings in maintenance costs.
The compact and optimized housings of the helical bevel gears distinguish themselves by being machined on all sides and are therefore ready for a number of installation options and applications. Various regular shaft executions and the double chamber shaft seals are prepared for use.

Helical Bevel equipment motors for intralogistics

Tip by doing this for additional information regarding Helical bevel gearbox.