Single reduction worm gearing offers high ratio reduction with few moving parts in a close-coupled small drive. The proper angle arrangement of driving-to-driven machine requires a minimum of space. Input and result shafts can be extended in either or both directions in horizontal or vertical arrangements adaptable to any mounting requirement. Efficient electric motor speeds are reduced to sluggish speed requirements of several industrial machines in one reduction.
Product Features
Ratios 5:1 to 70:1
Hollow & Solid Output Shafts
Vertical & Horizontal Mounting
Fan Cooled (Standard)
Motor Mounts (C-Face Adapters or Scoops)
Cast Iron or Metal Housings
Products
The exclusive usage of the involute Helicoid Thread form (with departing side contact) on the worm and gear offers high efficiencies, and lengthy service existence. The hardened surface and polished alloy steel worm develops a simple, work hardened surface area on the bronze equipment. Because of this worm gears use in and improve with extented service while other gears are deteriorating. Ever-Power offers a wide selection of model configurations, sizes, ratios, and accessories from our standard products.
Fabricated Designs
If your application involves severe shock loads or feasible housing damage from external sources (as in steel mills or mobile equipment applications) Ever-Power can provide fabricated steel housings with up to 48″ center distances. Fabricated housings provide optimum rigidity and strength that allows the tranny of higher horsepower amounts than are possible with regular cast iron systems. Extra heavy part plates connect the worm and equipment shaft bearing facilitates, assuring correct meshing of the gear under all load circumstances. In smaller sized sizes, fabricated metal reducers are interchangeable with Ever-Power standard cast iron reducers.
Custom Designs
Ever-Power can provide custom acceleration and reversed engineered reducers for the application, be it a new project or a primary drop-in replacement for a competitor’s swiftness reducer. Fabricated metal reducers allow Ever-Power to match a competitor’s footprint, centerline, and shaft height allowing a primary drop-in substitute saving the client time and money.
Long – Quiet Life
All worm gears in Ever-Power reducers are manufactured from phosphorous bronze. Our style also includes a hardened, floor and polished alloy metal worm. This mixture develops a clean, work-hardened mating surface of the bronze gear which improves with prolonged service.
Worm gearing is a class of gear reducers that utilizes right angle, nonintersecting shafts. This form of reducer provides smooth and quiet procedure and permits the likelihood of large speed reductions. These gears are available from stock in a wide variety of ratios, from only 4:1 up to 3600:1. The small design and building allows worm gear reducers to be placed in a comparatively small space. Thus, very high reductions in a limited package size can be achieved with this configuration. Our worm equipment features the continuous sliding tooth action between worm and the teeth. This escalates the tolerance for heavy loads and shock loads. Worm gear drives provide users high reducing convenience of relatively low cost when compared to various other types of gearing.
The use of worm gearing extends across many industries including food, beverage and grain and has many applications. Some applications that make use of worm gearing are: conveyors, mixers and bucket elevators.
Ever-Power worm gear reducer gearbox series foundation on years of experiences uses designed teeth surface with unsurpassed torque transfer performance with great overall performance, efficency and cost.Worm gear program transmits power through sliding contact, leading to extremely low vibration , sound, small backlash and self-locking property
-Housing:Onetime we casting creats great rigidity for severe impacts. Outer cooling fins and internal lubrication essential oil diversion channel style to improve heat dissipation.
-Worm Shaft: Manufactured with Carbon alloyed Steel S45C or SCM415, precison machined and carburized to HRC45 or HRC60, then for precision tooth grinding to make sure maximum contacting.
-Worm Wheel: Manufactured with Carbon alloy ALBC2, teeth are machined by precision CNC hobbing machine to sustain high impact.
A worm equipment reducer is one type of reduction gear container which contains a worm pinion insight, an output worm equipment, and features a right angle result orientation. This kind of reduction gear package is normally used to take a rated motor velocity and produce a low speed result with higher torque value based on the reduction ratio. They often can resolve space-saving problems since the worm gear reducer is among the sleekest reduction gearboxes available due to the little diameter of its output gear.
worm gear reducerWorm gear reducers are also a favorite type of rate reducer because they offer the greatest speed decrease in the tiniest package. With a high ratio of speed decrease and high torque output multiplier, it’s unsurprising that many power transmission systems utilize a worm equipment reducer. Some of the most common applications for worm gears are available in tuning instruments, medical examining equipment, elevators, protection gates, and conveyor belts.
SW-1 and SW-5
Torque Transmission offers two sizes of worm gear reducer, the SW-1 and the SW-5 and both can be found in a range of ratios. The SW-1 ratios include 3.5:1 to 60:1 and the SW-5 ratios include 5:1 to 100:1. Both these options are manufactured with tough compression-molded glass-fill polyester housings for a long lasting, long lasting, light-weight speed reducer that’s also compact, noncorrosive, and nonmetallic.
Features
Our worm equipment reducers offer an option of a solid or hollow result shaft and show an adjustable mounting placement. Both the SW-1 and the SW-5, nevertheless, can withstand shock loading much better than other reduction gearbox styles, making them well suited for demanding applications.
Rugged compression-molded glass-fill polyester housing
Light weight and compact
Non corrosive
Non metallic
Range of ratios
SW-1, 3.5:1 to 60:1
SW-5, 5:1 to 100:1
Grease Lubrication
Solid or Hollow output shaft
Adjustable mounting position
Worm Gear Reducers also referred to as worm gearbox or worm acceleration reducers. Worm equipment reducers are utilized for speed decrease and increasing the torque for electrical engine drives. You can decide to attach your NEMA engine to the reducer utilizing the NEMA C encounter flange or make use of a coupling. If you need a coupling for the result or input shaft discover our coupling section for selecting a coupling. We offer four assemblies left hands and right hand and double result shaft and shaft insight and shaft result. Interchangeable with many worm gear manufactures. Find data sheet in item overview for diamensions. Unless you see your type, please Contact Us.
8 Ratios Available from 5:1 to 60:1
7 Gear Box Sizes from 1.33 to 3.25″
Universally Interchangeable Design for OEM Replacement
Double Bearings Applied to Both Shaft Ends
Anti-Rust Primer Applied Inside and Outside Gearbox
Shaft Sleeve Protects All Shafts
S45C Carbon Steel Shafts
Flange Mount Versions for 56C and 145TC Motors
Ever-Power DDVM series triple-reduction worm gear velocity reducers can be found in ratios from 5000:1 to 175,000:1 and center distances from 7” to 20” (larger sizes on request). Result torque ranges from 33,000 in pounds. for the 7” CD DDVM-70 to 582,900 in pounds for the DDVM-200. Mechanical HP insight requirements are from 0.09 HP for the 175,000:1 7 in CD reducer to 6.25 HP for the 5000:1 20” CD unit. These reducers can be found in four configurations: horizontal, vertical, shafted, and shaft installed.
These reducers are ideal for water/waste-water apparatus drive applications such as thickeners and clarifiers, which require a vertical down shaft. Other obtainable configurations also make Ever-Power triple decrease reducers perfect for make use of on mixers, elevators, solar panels, astronomical telescopes, indexing tables, hoists, conveyors, or other process or materials handling systems where huge torques/sluggish speeds are needed.
These reducers are also available with a helical main reduction stage and so are termed the HDVM series
Product Features
Ratios 5000:1 to 175,000:1
HP from 0.09 to 6.25.
Output Torque to 583,000 in lbs.
Output RPM as low as 0.01 with a 1750 RPM input.
Ideal for ultra-slow rate, high torque applications
8 Ratios Available from 5:1 to 60:1
7 Gear Box Sizes from 1.33 to 3.25″
Universally Interchangeable Style for OEM Replacement
Double Bearings Used on Both Shaft Ends
Anti-Rust Primer Applied Inside and Outside Gearbox
Shaft Sleeve Protects All Shafts
S45C Carbon Metal Shafts
Flange Mount Versions for 56C and 145TC Motors
Description
The HDR Series worm equipment reducers are found in low to moderate horsepower applications to lessen speeds and increase torque. Worm gear reducers can be found in direct or indirect drive, direct drive versions are 56C or 145TC flange mount with either right, still left or dual result shafts or a hollow bore result. The indirect drive versions are shaft input-shaft result boxes for make use of with sprocket or pulley drive systems. They provide an effective low priced solution to speed reduction and increased torque, with higher tolerances for shock loading than helical gear reducers.
In order to decide on a gearbox speed reducer, you will need to determine the required torque and provider factor for the application. Click on “Specs” above for a desk that will aid in identifying the service element. For service elements above 1.0, multiply the required torque by the assistance factor.
Our regular 700 Series – the heart of Ever-Power acceleration reducer products – has been serving industry reliably for over 40 years. Its verified modular style has set the industry standard for functionality and may be the most imitated item in today’s worm gear speed reducer marketplace. But why accept a knock-off when you can have the initial – from Ever-Power.
Specifications
11 basic solitary reduction sizes
8 basic dual reduction sizes
1/6 – 25 HP
5:1 – 100:1 ratios single reduction
100:1 – 3600:1 ratios double reduction
Non-flanged, NEMA C-face quill, and coupled input styles
Projecting and hollow result shafts
Projecting diameters from 1/2″ to 2-1/4″
Hollow output bore diameters from 5/8″ to 3-7/16″ (with over 20 bore sizes in stock)
Product Features
The 700 Series’ large oil reservoir provides efficient heat dissipation and lubrication for longer operating lifestyle.
Its multi-position mounting versatility permits installation in virtually any position.
Housings are straddle-milled, best and bottom level, for precise alignment of horizontal and vertical bases.
Internal baffles assure positive, leak-free venting.
The 700 Series’ rugged housing, fabricated of fine-grained, gear-quality cast iron, provides optimum strength for optimum durability, and also greater precision during worm and gear alignment.
Ever-Power 700 Series high-strength bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and overhung load capacities, sizes 713-760.
Our 700 Series’ high-strength steel output shaft assures capacity for high torque and overhung loads.
Pipe plugs allow easy fill, level, and drain in any mounting position.
The 700 Series’ super-finished oil-seal diameters on both input and output shafts extend seal lifestyle.
Both 2D and 3D CAD drawings are available in our eCatalog.
TheIncreased Quality! Industrial Ranked! Inexpensive!One-piece gearcase, without exterior ribs, is constructed of close-grained cast iron and provides for rigid gear and bearing support. It also offers excellent heat dissipation.Dual lip, spring-loaded seals protect from oil leakage and stop dirt from entering.Stepped shafts with oversized ball andtapered roller bearings.Carbon steel shafts for greater strength.High tensile strength cast bronze worm wheel and hardened and ground alloy steel worm made intregal with the shaft for lengthy and trouble-free life.Oil sight gauge for ease of maintenance (not available upon sizes 25 and 34).Factory oil filled.Every unit test run prior to shipment.Universal installation with bolt-on feet.Highly modifiable design.All of this at substantially decrease prices than you have been accustomed to spending money on reducers of lesser quality. Less