Helical geared motors will be the most regular and cost-effective solution for most drive applications. Helical equipment units are coaxial, where the gear unit result shaft is good motor shaft. A good shaft is usually used as output shaft. Additional parts – e.g. gear tires or chain wheels – to transfer the power to the powered load are for that reason required. Solutions making use of helical geared motors are capable of an exceptionally variable speed range.
SIMOGEAR helical geared motors are for sale to the energy range up to 20 HP (15 kW) and rated gear device torques up to 5,900 ft-lb (8,000 Nm).
Ever-Power Helical Gear Motor Features
Ever-Power Helical Gear Motor 2-Stage
Integrates with Siemens drives and automation
Energy efficient (Mechanical efficiencies up to 96%)
NEMA Ever-Power motors
2 or 3-stage construction
Foot, flange mounting
Solid shaft, hollow shaft, and Ever-Power keyless tapered shaft locking system
Technical Information
Helical Gear Motor – 2-Stage
Helical Gear Motor – 3-Stage
Sizes
13
13
Output Torque
74 – 14,000 ft-lb (100 – 19,000 Nm)
74 – 14,000 ft-lb (100 – 19,000 Nm)
Ratio
3.4 – 57
36 – 328
Motor Power
1/3 – 75 HP (0.25 – 55 kW)
1/3 – 75 HP (0.25 – 55 kW)
Helical Geared Motors for an array of applications
Motors with a helical gear unit from Ever-Power have a high power density and a huge number of choices. The gear units are stated in three series and many sizes for an array of applications.
Ever-Power Helical Gear Products impress with exceptional features:
Powerful
Our helical gear devices give a maximum torque of 26,000 Nm (because an Industrial gear unit up to 250.000 Nm).
Efficient
High efficiency escalates the productivity of the application form.
Hygienic
Ever-Power Helical Gear Models have wash-down capability because of their smooth surfaces.
Robust
If required, we can treat Ever-Power Helical Geared Motors with nsd tupH Corrosion Protection, which also withstands intense cleaning agents.
Always the right option: Our Helical Geared Motors
No two applications are the same. Due to this, Ever-Power items three different drive solutions with helical equipment units. All variants can be found as flange or foot/flange mounted versions.
The all-rounder
Standard Helical Geared Motors have an array of uses and offer confirmed quality. This kind of geared engine is offered from Ever-Power in six sizes, in two or three stage variations with torque ranges from 50 to 700 Nm. We produce the apparatus wheels for helical equipment units from extremely wear-resistant, case-hardened steels.
Compact power packs
Our UNICASE Helical Geared Motors have a concise design, with an extremely robust grey cast iron housing. They include especially efficient motors to be able to operate as effectively as possible, even at the maximum torque of 26,000 Nm.
Find out more about the powerful UNICASE Helical Geared Motors!
Find out more
Easy maintenance: Wash-down able helical geared motors
With the Ever-Power series we positioned a higher priority on a smooth, easy to clean surface. This characteristic is especially important for users in hygienically important sectors like the meals or pharmaceutical industries.
According to the size of the apparatus unit, we create Ever-Power Helical Gear Devices with a die cast aluminium or grey cast iron casing. In this way you have optimum overall performance with every variant.
The aluminium housing of the Ever-Power series provides organic corrosion protection. Nevertheless we can provide additional safety if necessary with the innovative nsd tupH surface treatment. In contrast to conventional paint it cannot flake off – an excellent advantage in harsh environments. Read right here how Ever-Power Helical Geared Motors optimise creation at the chocolate producer Zotter in Austria.
Ever-Power style for foot and flange installation. Gear casing machined on all sides for universal program.
Optimized gearing geometry here and in all the other models results in remarkable running smoothness. For special environmental conditions the gear unit can be installed with two shaft seals.
Technical Data
Number of sizes:18
Power Range:0,12 – 55kW
Output torque range:23 – 14,000Nm
Ratio:0.8 – 13,500
Output option:output shaft
Assembly/mounting:uniblock, flange, foot
Version
Solid shaft design
Footed, flanged or feet/flange mounting designs available
Inline gear units
Characteristics
Compact, space saving design
Torsionally rigid, high strength cast iron housing
High axial and radial load bearing capacity
Quiet Operation
Application Specific Solutions
Our most selling and most economical unit, the EP equipment motor, sets new criteria for reliability and economic climate and includes unparalleled regular features. An inverter friendly design offers easy integration at this point and a truly future proof solution. ” or metric dimensioned output shafts are standard providing for easy integration into all your applications. The EP gear motor offers total versatility in mounting choices includes foot, base, face, and flange solutions. The motor terminal box can be mounted in choice positions rotated in 90° steps around the engine frame providing for unparalleled integration possibilities.
EP gear motors adhere to North American and International requirements, including NEMA, IEC, CSA, & CE, the EP series permits worldwide acceptance, a true total alternative for our global clients.
Excellent protection of IP65 acc. to IEC 529 assures you that the EP series is certainly dirt tight and hose evidence, and can be utilized outside or in wet and dusty environments without the use of additional enclosures. Full rated output is offered by the result shaft of the machine.
Product Features
Torque 20 … 18.500 Nm
Output Speeds 0,3 … 450 min-1
versatile installation possibilities
Totally enclosed, sealed against dust and water spray
Lubrication change first after 15000 hrs
Low noise gearing
Mains connection 110 … 690V, 50/60Hz
Enclosure IP65 (Regular), IP66 (Optional)
Additional features:
Connecting with Plug connectors.
With integrated inverter up to 7,5kW.
CSA, UL, ATEX, GOST, CCC, ISO9001, ISO14001, OHSAS18001
Motors according to EN 60034
Corrosion category predicated on DIN ISO 12944-5
C1, C2, C3, C4, C5-I, C5-M
Helical geared motors online store
On this web page of our geared motors online store, you will find a big collection of gearbox units. This consists of worm gearboxes, spur gearboxes, bevel gearboxes, toned gearboxes and planetary gearboxes in various styles and speeds expressed in revolutions per minute (rpm, rev/min, min1). They can be purchased in common sizes, installation positions, examples of protection and styles. Available engine powers range between 0.12 kW through 0.18 kW, 0.25 kW, 0.55 kW, 0.75 kW, 1.1 kW, 1.5 kW, 2.2 kW, 3 kW, 4 kW, 5.5 kW, 7.5 kW, 11 kW, 15 kW, 18.5 kW, 22 kW, 30 
kW, 45 kW, 55 kW, 75 kW, to 90 kW, or can be quoted on request.
Geared motors of particular design
Spur gear drives can be found in various speeds, we.e. from less than 1 up to 1000 revolutions per minute (rpm, rev/min, 1/min). Spur equipment motors are generally also designed to match customer’s person requirements. With decades of experience and our very own last assembly, we are a perfect partner for businesses that need external experience in a large spectral range of issues – whether it’s a geared motor with brake engine, a special shaft, particular supply voltage, a spur gear electric motor or explosion protected style. Our focus is on premium quality, a competent team and a price that conforms to the market.
In six single-stage and fourteen two-stage and three-stage sizes, the helical gearmotors by Ever-Power ensure an maximum ratio between power and space requirements.
Your advantages
High torque density
Long service life
R37 … R167 Reduced backlash option
RM series, specially made for agitating applications
The proven modular idea and our strict quality requirements allow Ever-Power to supply a diverse range of torques and reduction ratios with incomparably finely tuned gradings. With this outstanding diversity, Ever-Power sets new standards in neuro-scientific drive engineering.
Available versions
Single-stage or multi-stage
Foot-mounted or flange-mounted
Foot-mounted and flange-mounted
Flange-mounted with prolonged bearing hub
RX series (single-stage)
For high output speeds, the exclusively single-stage equipment devices RX57 to RX107 offer compact solutions for your system design.
R series (two-stage and three-stage)
Our complete selection of helical gearmotors provides the optimum size and power solution for every drive job. And for applications where weight is an issue, our multi-stage gear units provide something special: Because of their die-cast aluminum design, the models R07, R17 and R27 are three especially effective lightweights – ideal as satellite drives and for use in light machine constructions. Reduced backlash helical equipment units are also available for particularly precise requirements.
RM series
RM gearmotors with extended result bearing hub are a special kind of helical gearmotor. They were designed especially for agitating applications and allow for high overhung and axial loads and bending moments. The remaining data corresponds compared to that of standard helical gearmotors.
