This collar has a quick-clamping design to make frequent adjustments using a lever handle rather than tools. It is well suited for applications that want quick alterations and process tuning such as adjusting guideline rails or locating components. It is manufactured from metal with an anodized end that increases the metal’s wear and corrosion resistant properties and boosts its surface hardness, holding power, and overall look. This collar posseses an aluminum lever handle with a gold anodized finish for quick installation and relieve of the collar. The operating temperatures because of this collar range between -40 to 93 degrees C (-40 to 200 degrees F). This shaft collar is suitable for use in a variety of applications, including in the motor cast aluminium china vehicle industry to situate components in automobile electricity steering assemblies, the manufacturing industry to locate components on a conveyor belt system, and the hobby 
craft market to hold wheels on axles in handy remote control vehicles, among others.
Shaft collars are ring-shaped devices mostly used to secure pieces onto shafts. They also serve as locators, mechanical stops, and spacers between different components. The two standard types of shaft collars are clamping (or split) collars, that can come in one- or two-piece designs, and setscrew collars. In both types, a number of screws hold the collars set up on the shaft. In setscrew collars, screws will be tightened through the collar until they press straight against the shaft, and in clamping collars, screws are tightened to uniformly compress the collar around the shaft without impinging or marring it. Setscrew collars and one-part clamping collars must be installed by sliding the collar over the finish of the shaft, while two-piece clamping collars separate into two halves and may be installed between components on the shaft. Shaft collars are made from a variety of materials including zinc-plated metal, aluminium, nylon, and neoprene. Found in nearly all sorts of machinery and industry, shaft collars are being used in applications including gearbox assemblies, motor bases, equipment tools, drive shafts, agricultural implements, medical gear, and paper and steel mill equipment, amongst others.
EPT manufactures shaft collars, rigid couplings, and zero-backlash action control couplings including beam couplings, bellows couplings, Oldham couplings, curved jaw couplings, and miniature disc couplings. The business, founded in 1937, and headquartered in Marlborough, MA, complies with Restriction of Hazardous Chemicals (RoHS) and Registration, Analysis, Authorization, and Restriction of Chemicals (REACH) standards.
One-part clamping shaft collar for applications requiring a far more uniform holding ability and larger axial load ability than setscrew collars
Quick-clamping collar design to make frequent adjustments without tools
Aluminum with a great anodized surface finish for greater corrosion resistance, wear resistance, and area hardness than plain aluminum
Includes an aluminium lever take care of with a gold anodized finish for quick installation and relieve of the collar
Operating temperatures range between -40 to 93 degrees C (-40 to 200 degrees F)
Shaft collars are commonly used as courses, spacers, mechanical stops, and for component alignment in a shaft. They are one of the most typical power transmission factors and are found on devices in most industries.