Single and double reduction planetary gear drives to be utilized with electric, hydraulic, air flow motors or mechanical power input from high rate, low torque sources to provide decreased speeds at increased torques. The input part has regular SAE pads for engine mounting. Available in the three result configurations proven below. Many units can be furnished with an intrinsic parking brake.
One reduction drives are limited by 3500 RPM input; dual reduction drives to 5000 RPM. Units with essential parking input acceleration is bound to 2500 RPM.The same torque is available in either direction of rotation. Torque ratings are intermittent. For constant operation reduce torque ratings to about 1/3 to 1/2 the values shown. Models provide 95% power tranny efficiency.
Wheel Drive
Input side has standard SAE pads and splined input. Output side has hub for installation automobile wheel. Free wheel can be done by using the spring disconnect to disengage the drive shaft. The disengage feature is standard on all wheel drives.
Shaft Output
Input side standard SAE pads with splined input. Output side choices include: Keyed circular, hexed, hollow, tapered or splined shaft.
Spindle Drive
Input side is standard SAE pads with splined insight. Output side includes a flanged spindle for coupling to the strain.
Swing Drives
Ever-Power model 6 emerges with or without integral parking brakes. The “SW” Power Wheel offers extra-huge tapered roller bearings, a ductile iron hub and heat treated ring gear to reduce backlash growth caused by wear. The exterior bearing nut provides the best in shaft hydraulic planetary drive retention and shaft power. Output could be a spindle shaft or different sizes of essential pinion gears.