We are focused on research and expansion of goods that meet up with the increasingly superior electronics industry and so are trusted in computers, home appliances, consumer electronics, communications, data, industry, medical and other fields.
We also has patent for 360 level AC PIN interchangeable type adaptor in fact it is leading the world’s exclusive design.

Ever-Power provides goods which are small, lighter, more electricity efficient, and easier to use.
We selling products around the globe and obtain the certifications for each of country. And in addition acquired ISO9001:2015 and ISO 14001:2015 etc. to make sure products meet the latest regulations.
Gear adapters install between the vehicle transmitting and power take-away, and can serve several purposes. Mostly, adapters are employed to improve the way of rotation of the PTO output shaft. They may also be utilized to space the PTO out and away from the transmission case. On some imported or non-SAE standard transmissions they allow for the mounting of typical 6-bolt power take-offs. Gear Adapters can be found to match most popular transmissions.
Different body configurations: Can relocate the PTO output shaft to improve clearance for a driveshaft or direct-coupled pump
Improvements PTO shaft rotation: Fits PTO rotation to that of the driven equipment
Standard and non-standard bolt patterns: Fits SAE regular PTOs to nonstandard transmissions

• Frame made of 1/4″, 3′ x 3″ and 1/4″, 2″ x 2″ steel tubing
• Operates from skid steer hydraulics
• Requires a the least 16 GPM; maximum of 22 GPM (makes 20 to 40 HP off of the power remove)
• You don’t need to modify electric power take off shafts
• Adjustable lower arms
• Reinforced heavy duty universal mounting brackets
• Complete with motor, hydraulic hoses and toned faced couplers
• Ideal for three point electrical power take off devices – snow blowers, mowers, tillers, post hole augers, etc

: Over-running clutches give a safe methods to protect operators and expensive machinery from circumstances when the inertia of PTO driven put into practice exceeds and over-operates the tractor PTO quickness. When this happens, the over-operating coupler will free-wheel
smoothly and safely. Over-operating clutches will normally withstand applications requiring up to 65 h.p. at 540 rpm and 100 h.p. at
1000 rpm. Serious shock loads or drive line angularity will reduce this capability
If the length of your PTO will not fit properly within a tractor, a PTO adapter can extend the size without having to replace it for a new one. This adapter comes with an overall amount of 7-3/16″ with a man end 1-3/8″ x 6 spline and a lady 1-3/8″ x 6 spline end.
Create additional length on the finish of your PTO. This tractor PTO shaft adapter has got both a lady 6 spline end and a man 6 spline end, each end has a diameter of 1-3/8 in. This allows more connection alternatives and is suitable for anyone that owns an older tractor because the older parts might not exactly be produced anymore and so are less common.
The over-running coupler can be an essential part of PTO travel on rotary mowers, bailers, hay conditioners or any implement where inertia of driven unit could be required to over-run generating source. The coupler drives solidly from tractor to put into practice and free wheels smoothly when apply exceeds tractor PTO speeds. All sizes are nominal.
Converts a 1 1/8″ keyed spline to a 1 3/8″ 6 spline.
Required with 1000 RPM gearcase upgrade or Three Point Hitch kit for the 25PTOC.
This Small 1000 (21 Spline) to 540 PTO Adapter may be the perfect meet for your Shop Dog. It usually is easily carried in the Shop Dog’s hitchpin and PTO adapter carriers.
This is also a terrific PTO adapter for tractor use. This adapter reduces the tractor’s PTO from 1-3/8″ x 21 spline to 1-3/8 6 spline (540) and extends the PTO shaft 4-1/8″. It comes with an overall amount of 6-3/8″ and is ranked for tractors up to 70 HP.