Laser cutting air compressor

9.Motor maintenance.
According to the motor instruction manual for maintenance.

8. drive belt.
To adjust the degree of tightness every 2000 hours, every 4000 hours to check on the wear and tear, according to wear and tear decide whether to replace.

7, safety valve.
Every 4000 hours to check on if the action is sensitive.

6.Pressure valve.
Clean every 4000 hours, and check if the opening pressure is regular.

because for oil-atmosphere compressors, the oil-drinking water separator function: separates the essential oil from the moisture in the air flow and therefore accumulates over an extended period of period and will affect the filtration effectiveness without the need to replace or clean the oil-water separator

5, oil and gas separator.
Every 4000 hours need to replaced a new piece.

Otherwise the oil will make a influence of the Air Compressor For Tire Production Equipment cutting effect

4.oil filter.
Every 2000 hours to displace a new piece.

Every 1000 hours want check oil content nonetheless it need to replace the brand new oil after 4000 hours