Boring & Milling Head Unit xt50

   Boring & Milling Head Unit xt50

#CNC Machine including
Boring Milling Head Uni xt50-1 can match with several types of spindle and
can be applied in several processing conditions, including boring, milling, drilling,
tapping, twisting, grinding, etc. boring head for milling machine can be
installed on various machine production lines, common machine reformation and
combination center machine. The accuracy of processed products is high, the
transmission is easier, the appearance is more
beautiful and the design is more scientific

Spindle type of the XT 50 spindle head:
NT50 is the traditional type with the taper of 7:24 and
cutter installed with rear axle rod.
MT5# taper shank with flat tall can be directly placed.
ER50 damping cutter with straight shank 2 20mm.

Boring & Milling Spindle Head Gearbox Motor

  Boring & Milling Head Unit xt50

he motor power and speed can be configured with speed ratio of triangular belt,
synchronous belt and poiy V belt according to the
requirement.
* The customizalion ol power head with special specification can be accepted.
* The front loading of left side for 90 front Ioadiig of right side for 90 ,
back loading of left side for 90 back loading of right side for 90
and downward prepo&tionl downward post position can a so be carried out in the
configuration direction of motor box.

   Boring & Milling Head Unit xt50

Boring & Milling Spindle Head Gearbox Motor + ATC

   Boring & Milling Head Unit xt50

The motor power and speed can be configured with speed ratio of triangular belt,
synchronous belt and poiy V belt according to the
requirement.
* The customizalion ol power head with special specification can be accepted.
* The front loading of left side for 90 front Ioadiig of right side for 90 ,
back loading of left side for 90 back loading of right side for 90
and downward prepo&tionl downward post position can a so be carried out in the
configuration direction of motor box.

   Boring & Milling Head Unit xt50

The booster type unclamping cylinder is adopted for the spindle head, so that
it has the advantages of compact structure and high speed
automatic tool change. It is mainly applied to the full automatic equipment,
and can realize to store a certain quantity of cutter and automatic tool changer
completing the automatic exchange function of cutter by matching the various
tool magazines. The processing efficiency of the numerical control machine tool
is further improved, and one clamping is realized, namely, many processes
can be completed; and it is assembled Into the CNC milling machine or component
of the spindle system in the machining center.


The non cutting time is shortened, the production efficiency is improved,
and the non cutting time can be reduced to 20% 30%; and the labor repeatability
of the manual tool change frequency is reduced.

The process is concentrated, so as to expand the process range of the CNC
numerical control machine tool, reduce the floor space.

Improve the machining precision; and moreover, It has characteristics of high
repeated positioning accuracy of the cutter and safety and reliability.

  Boring & Milling Head Unit xt50

Boring & Milling Spindle Head Gearbox Motor + ATC+CTS

  Boring & Milling Head Unit xt50

The supercharged type cylinder is adopted for the spindle head, so that it has
the advantages of compact structure and high speed automatic tool change.
ft is mainly applied to the full automatic equipment, and can realize to
store a certain quantity of cutter and automatic tool changer completing
the automatic exchange function of cutter by matching the various tool
magazines. The processing efficiency of the CNC machine tool is further
improved, and one clamping is realized, namely, many processes can be
completed; and It is assembled into the CNC milling machine or component
of the spindle system in the machining center. The gearbox is composed
of the high speed (1:1), neutral gear and low speed (1:4); and the rough
machining and finish machining become
possible at the same time by virtue of the high and low speed switching
which can shift the gear.


Characteristics of Internal cooling of CTS
As the cooling liquid of the hollow internal cooling spindle is ejected from the
cutter, the cooling effect of the culling part which can directly act on the
workpiece and cutter is superior to that of the common spindle, so that the
surface quality of the machined part is better. The external cooling is affected
by the rotary centrifugal force of the cutter, and most of cooling liquid is
thrown away by the cutter, therefore, the cooling effect is bad.

It is more suitable for the deep hole working. When processing the deep hole,
the cooling liquid is transported to the knife handle through the through hole
of the spindle center and ejected through the through hole on the cutter, therefore,
the cxoling effect of the cutting part and workpiece of the cutter is obviously
better than that of the external cooling device, and cuttings can be rapidly
discharged through the spiral chute of the drill smoothly by virtue
of the high pressure cooling liquid, thus, realizing the continuous cutting,
and improving the processing efficiency and cutter endurance.

The oling liquid can bring a part of heat through the spindle center hole when the
spindle rotates and processes at high speed, Which IS more beneficial to improving
the service lifespan and precision of the spindle,
and meanwhile, being able to avoid the problems of affecting the precision of
the machined part due to the thermal deformation of the spindle.